Provide high-tech measuring products and technical developments for instrument service providers
NDT and Photoelectric Measurements
产品详情
Share to:
Barcol Impressor HM-934-1
Spec: It is mainly used in aluminum processing industry. Also, it can be used for glass steel industry.
Model: HM-934-1
产品详情

 Features

* A digital indentation hardness tester, is the latest design and development of our company.
* It is characterized in that provided with a balance positioning, a digital display of hardness value, and a non disassembly calibration and adjusting.
* It is with good stability, convenient calibration, and high accuracy of detection.
* Small in size, portable. Single hand operation, easy to use. Can be used in any occasion as long as the hand can reach.
* Wide test range, can test from very soft pure aluminum to a particularly hard aluminum alloy. effective test range equivalent to the Brinell Hardness of 25~135HB.
* No need to support. The hardness tester is only tested  on one side of the sample without support.
* Can be used for measuring Barcol Hardness, other hardness   value can be calculated out by the experimental curve. Such as   Brinell Hardness (HB), Vickers Hardness (HV), Webster   Hardness (HW), Rockwell Hardness (HRB/HRE/HRF/HRH).
* With the maximum hold function, hold the maximum  hardness value during measurement.
* Provide Bluetooth data output choice.

  Specifications 

Range
0Hba~100Hba,Amount to 25HBW~135HBW
Resolution
0.1HBa
Indication Error
81Hba~88Hba±1Hba
42Hba~48Hba±2Hba
Repeatability Error
81Hba~88Hba±1.5Hba
42Hba~48Hba±2.5Hba
Brinell Hardness
-----
Vickers Hardness
-----
Wenster Hardness
-----
Rockwell hardness
-----
Maximum Hold
Average Calculation
-----
Operating Condition
Temperature:0ºC~50ºC   Humidity:<80%RH
Power Supply
2x1.5V AAA(UM-4)Battery
Dimensions
170mmx63mmx82mm
Weight
390g(Not Including Batteries)
Standard
Main Unit
Accessories
2 Pins
2 Standard Blocks
Screw Driver
Spanner
Carrying Case
Operation Manual

 Downloads

BarcolImpressor_HM-934-1_Catalog

HM-934-1_EN_Manual

  RS232Software

NOTE: The name of RS232 Software is 'RS232_EN_4.0.rar' after downloading. Just decompress 'RS232_EN_4.0.rar' with Decompress Software, Enter password:www.landtek.cn. a folder named 'RS232_EN_4.0' is abtained. There are RS232 Software and install instruction inside the folder.

Login
Login
My Profile
leave a message
back to the top